|Maximum Sealing Length||400mm (15") – 800mm (31.5”)|
|Seal Width||9mm (Standard-Wide) – 20mm (Extra-Wide)|
|Film Thickness||2 x 1000 gauge (4 x 250 micron)|
|Voltage||230V (Single Phase), 115V (Conversion)|
|Power Consumption (Watts)||Weld 1730W, Cool 125W, Standby 250W|
|Fuse Rating||T3.15 amp *check*|
|Footprint||607mm (L) x 190mm (W) x 150mm (H) *CHECK*|
|Weight||From 23kg (Seal Only), From 38kg (Vacuum Seal)|
|Operation||Hand Operated & Manually Operated|
HMS Medical Validatable Sealer
*Designed for cleanroom use*
A range of sophisticated single phase 240 volt impulse heat sealers for sealing a wide range of materials.
This system measures & controls the sealing wire temperature, allowing for unrivalled seal repeatability.
On the HMS Medical Validatable Sealer, all the sealing parameters (time, temperature, cooling temperature & pressure) are measured/recorded to the PLCs memory, along with date & time, for uploading onto a computer.
All the seal cycle settings arepassword protected to avoid unauthorised alteration.
The digital controllers allow for up to 10 different sets of parameters to be programmed, with alphanumeric descriptions.
The temperatures are controlled to the nearest degree °C (with the time control to the nearest 1/10th of a second!).